Status Displays Via The Configuration Manager - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance
Status Displays

Status Displays via the Configuration Manager

Note: If you have started the update image by pressing the "Default" button,
you will see the following LED signals after restart: The "Messages" LED
lights up in green, the "Line" LED flashes green and the "Power" LED is off.
Status Displays via the Configuration Manager
The configuration manager provides various overviews that display the current status on the
PBX.
Note: Further overviews of the current settings are described in the
corresponding function sections.
Overview of the PBX/Dealer Data
The overview of the PBX data includes the current firmware version, the serial number as well
as the MAC address on the PBX.
Note:
The overview can be viewed in the configuration manager by opening the
page SERVICE > Info > PBX data or by clicking the Auerswald logo. If the
PIN for logging onto the configuration manager is unknown, the login dialog
can be canceled by clicking Cancel and a simplified overview can be viewed
by clicking the Auerswald logo. The current firmware version and the serial
number are already displayed in the login dialog.
For informational purposes, the dealer providing the PBX enters his own
data on the page SERVICE > Info > Dealer data.
Port Overview
The port overview shows the previously configured and the permanently-specified ports on the
PBX. In addition, the columns TCP (Transmission Control Protocol) and UDP (User Datagram
Protocol) show which transport protocols are used.
494
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11