Pbx Time; Configuring Pbx Time (Time And Date) Manually - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX

PBX Time

Configuring PBX Time (Time and Date) Manually

PBX Time
The PBX has an internal clock that returns the PBX time (time and date) on the connected end
devices. If the end device is so equipped, the PBX time will be displayed on the end device.
Furthermore, the PBX time is required to carry out functions such as switching configurations
as well as wake-ups.
During a power failure or PBX reset, the PBX time is lost. There are several ways to update it:
• Manually
• Via the network
• Using the buffered real-time clock – saves the time for approx. two hours in the case of a
power outage.
• Via ISDN (only COMpact 3000 ISDN or COMpact ISDN module available as an option)
Note: The switch to/from daylight savings is done automatically for the PBX
time.
Configuring PBX Time (Time and Date) Manually
Note: Changing the time could possibly lead to an automatic logoff in the
configuration manager.
The configuration can be made as follows:
• Via the configuration manager
• Using a character string on the internal telephone
Manually Configuring the PBX Time via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > PBX time.
2. In the Time entry field, enter the correct time. The following entries are possible:
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
457