Fax Transfer - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Managing Voice Mailboxes and Fax Boxes
Fax Box

Fax Transfer

Note:
Click in the line of the corresponding message to send the message by
e-mail.
If a fax has not been received/sent successfully,
corresponding line. Placing the cursor over the symbol displays a window
containing information on the failure of the fax transmission.
Click Update reloaded the page and update the data displayed.
Fax Transfer
The fax function of the PBX supports fax transfer in combination with a corresponding PC appli-
cation. The required Auerswald Fax printer driver has to be installed on the PC used and the
fax transfer function has to be purchased and activated in the Upgrade Center.
The outgoing fax is saved on the storage medium for the used fax box and the fax transfer is
controlled with the corresponding fax ID in the background by the PBX. If the destination of the
fax cannot be reached (busy or no reply), two further dial-up attempts will automatically be
made by the PBX.
For transferring and receiving faxes only one channel is available, i.e. only one fax can be trans-
ferred or received at the same time.
Configuring the PIN for Fax Transfer
The configuration can be made as follows:
• Separately for fax boxes
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Fax transfer function purchased and activated in the Upgrade Center
1. Open the page FUNCTIONS > Voice mail/fax boxes > Boxes.
2. Click in the line of the corresponding fax box.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
is displayed in the
173