Overview Of The Subscribers; Creating Line Groups - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
Internal Telephone Numbers

Overview of the Subscribers

2. In the Notes entry fields, enter the information that you would like to note. The
following entries are possible:
Up to 64 digits
Digits and characters
Further steps:
– Save your settings before you leave the page.
Overview of the Subscribers
The subscriber overview shows all of the subscribers already created along with their
telephone numbers and names.
Note:
The overview can be opened in the configuration manager by selecting
Subscribers in the list field next to
overview, click Close.
The overview can be printed by clicking Print.

Creating Line Groups

A line group is made up of multiple internal end devices at the same time. A telephone number
for line groups is used to access the end devices that belong to the line group via the PBX.
A maximum of six telephone numbers for line groups are allocated.
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > Internal numbers > Line groups.
356
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
and then clicking . To close the