Transferring Telephone Numbers From The Pbx Telephone Book Into The Telephone Book On A Dect System Telephone; Copying A Telephone Book Selection Into Other Mobile Handsets - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
DECT System Telephones

Transferring Telephone Numbers from the PBX Telephone Book into the Telephone Book on a DECT System Telephone

Transferring Telephone Numbers from the PBX Telephone Book into the
Telephone Book on a DECT System Telephone
The telephone numbers with their corresponding names entered in the telephone book can be
transmitted into a COMfortel DECT mobile handset.
The transmission can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
– Entries in the telephone book
1. Open the page USER DATA > Telephone book.
2. Select or clear the DECT check boxes for the telephone book entries in question for
the internal telephone numbers assigned to the mobile handset.
Enables transmission.
Disables transmission.
Further steps:
– Save your settings before you leave the page.
Note: The PBX begins to distribute the data to the mobile handsets in
question. If a mobile handset is currently not ready for the data transfer
(disabled, out of range or busy with a call), the PBX makes an attempt with
the next mobile handset after a few minutes until all of the data is distributed.
During the data transfer (duration: up to two minutes), the mobile handset is
not available and "Copying from PBX" is shown on the display.

Copying a Telephone Book Selection into Other Mobile Handsets

The telephone numbers selected for a DECT system telephone in the telephone book can be
copied into other mobile handsets.
Copying can be carried out as follows:
• Via the configuration manager
444
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11