Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 26

Important Information
Intended Use
When using the VoIP channels internally, the Ethernet port is suitable for connecting the
following end devices:
• COMfortel VoIP 2500 AB system telephone (recommended, as of firmware version 4.0B)
• Standard VoIP end device (SIP)
• Soft phone (SIP)
Important: Note that many standard VoIP end devices can only use the
functions of the PBX to a very limited extent.
USB Host 2.0
The USB host is suitable for connecting one of the following end devices:
• USB memory stick
• USB hard disk
• USB printer
Important:
The storage media used require an FAT16 or FAT32 formatting supporting
long file names.
The connection of a hub is not supported.
SD Card Slot
The SD card slot is suited for an SD or SDHC memory card.
Important: The storage media used require an FAT16 or FAT32 formatting
with vFAT for the support of long file names.
Configuration/Administration
The configuration/administration is performed by means of a PC connected to the PBX (directly
or via the LAN). The configuration manager is contained in the web server integrated into the
PBX and is simply opened with a browser. The installation of a special configuration software
is not required. The access is platform-independent and is, thus, possible with the browsers
Microsoft Internet Explorer and Mozilla Firefox on Windows, Linux and Mac-OS-X operating
systems.
The configuration manager enables you to do the following tasks:
• Configure the PBX
• Manage the recorded voice and fax messages
26
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11