Help; Opening Help; Navigating In The Help Window - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Using the Configuration Manager

Help

Opening Help

Help
Via the help you can access the entire instructions for the PBX.
Opening Help
Clicking below in the configuration manager opens the entire Help.
The Help topics navigation bar is located under the vertical navigation bar and contains many
Help topics. Help topics are provided for either the opened configuration page or for the open
topic areas.
At many setting points, the
as well as next the check boxes. If you place the cursor over the symbol, an information box
with the corresponding Help topic appears (tool tip). Clicking the symbol opens the associated
Help topic.
• Click the requested Help link in the Help topics navigation bar or click
corresponding setting point.
The corresponding help page opens. You can navigate back and forward within the
selected topic by clicking the
Note: You can always access the entire installation, operating and configu-
ration instructions for the PBX using the navigation.

Navigating in the Help Window

There are several ways to navigate through the help.
Navigating via the Table of Contents
Click the Table of Contents tab (this text is dependent on the operating system used) to go to
the table of contents (the tab is highlighted in yellow)
The table of contents will be displayed on the left-hand side of the help window as a directory
tree.
90
symbol is located next to the text of the entry, list and option fields
and
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
symbols.
next to the