Changing The Pin - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
Protection from Unauthorized Access

Changing the PIN

Changing the PIN
Any PIN on the PBX can be changed.
The change can be carried out as follows:
• Using a character string on the internal telephone
Requirements:
– Authorization Controlling of the PBX via telephone assigned to the subscriber
– Knowledge of the required PIN
1. Pick up the receiver.
2. Dial *99*.
3. Enter the existing PIN.
4. Dial *.
5. Enter the new PIN. The following entries are possible:
Exactly 6 digits
Digits
Note:
All of the PINs in the PBX are unique. This means that it is not possible to
allocate the same PIN twice.
Do not use dates of birth or dates as PINs. This makes it easy for an attacker
to find out the correct PIN. PINs which are easy to guess, such as 111111
or 123456, should also be avoided.
6. Dial *.
7. Re-enter the new PIN.
8. Dial #.
Note: If, at this point, you hear a busy tone instead of a confirmation tone, the
new PIN may already be in use in the PBX and no change takes place. Re-
attempt with another digit sequence.
480
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11