Overview Of External Telephone Numbers; More Information On Country-Specific Settings; Applying Country-Specific Default Settings - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
Analog Connection

Overview of External Telephone Numbers

Overview of External Telephone Numbers
The overview shows all of the previously created external telephone numbers with names.
Note:
The overview can be opened in the configuration manager by selecting
External phone numbers in the list field next to
close the overview, click Close.
The overview can be printed by clicking Print.

More Information on Country-specific Settings

The analog port has default settings that are required for analog ports in the corresponding
country (determined during country selection during the initial configuration of German PBX
models and international PBX models). Normally, these default values should not be changed.
Note: If modifications are necessary, configure them according to the instruc-
tions provided by your network provider on the page CONFIGURATION >
External phone numbers > Analog connection > Advanced settings.

Applying Country-specific Default Settings

The country-specific settings for the analog port can be changed (e.g., for a GSM gateway
connection that has been purchased in another country and therefore requires other default
settings).
The settings can be applied as follows:
• Via the configuration manager
Requirements:
– External analog port (only COMpact 3000 analog)
– Configuration manager, opened with sufficient authorization
– Expert view (click
– Configured prefixes (country prefix and local area code)
362
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
and then clicking . To