Selecting The Language; Configuring The Portal Page - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Using the Configuration Manager
Configuration Manager

Selecting the Language

Selecting the Language
You can select the language for the configuration manager.
The selection can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > Server configuration > Network.
Note: The selection is also provided in the international model during the
quick configuration using the configuration wizard.
2. Select the desired language in the Language list field under Webserver configu-
ration.
German
English
Further steps:
– Save your settings before you leave the page.

Configuring the Portal Page

After logging into the configuration manager, the portal page is displayed. Each user (adminis-
trator, sub-administrator, user) can configure this page according to his needs.
Not only information windows but also windows, in which functions can be enabled or disabled,
can be displayed. A total of up to ten windows can be displayed on a portal page.
Note: The portal page can be opened at any time in the configuration
manager. To do this, click
guration manager.
The configuration can be carried out as follows:
• Via the configuration manager
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
next to the PBX name at the top left of the confi-
85