Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 81

Using the Configuration Manager
Configuration Manager
Operating Instructions for the Configuration Manager
Logging Out
The link Logout is located in the upper area of the configuration manager.
Click Logout to return directly to the login page (log-in for the Web server of the system
telephone).
Entry and Selection Fields
Important: Before leaving a page, all of the settings configured on the pages
with the following labeled fields must be confirmed by clicking
An empty field normally indicates that a name or number is to be
entered. Click in the field in question and use the keyboard to enter a
number or desired text.
The following characters may not be used:
If increased security against Cross-Site Scripting (XSS) has been
enabled under CONFIGURATION > Server configuration > Network,
the following characters may also not be used:
In order to change an existing entry, double-click the entry to be
overwritten. The field then becomes blue and can either be overwritten
directly or the existing text can be deleted using the delete/backspace
key.
For functions that can be more than just switched on and off but only
have a few options to choose from, the field already contains a default
setting. To change this, click the opened list field to make a selection.
Left-click the field to open the list field.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
• " quotation marks
• $ dollar sign
• % percent sign
• < pointy bracket - smaller than
• > pointy bracket - higher than
• \ backslash
• ^ caret
• [ ] square brackets
• { } curly brackets
• ' apostrophe
• # pound sign
• & and sign
• + plus sign
• \ slash
.
81