Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 210

Configuring and Operating Functions
Call Parking
Configuring the Internal Base Telephone Number for the Parking Zone
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Call Parking.
2. Enter an internal telephone number in the Internal base telephone number entry
field. The following entries are possible:
2 to 3 digits in the range of 10 to 999
Note:
Double allocation of a number is not possible.
The telephone numbers 70, 80, 87, 701-706, 801-806, 875-879 and 8750-
8799 cannot be freely allocated. They are required for internal PBX use.
Using telephone numbers with few digits (two or three-digit numbers) inevi-
tably restricts the possible supply of telephone numbers requiring more
digits. For example, if the telephone number 12 is assigned, the telephone
numbers 120-129 and 1200-1299 are no longer available.
The default exchange line access number on the PBX is "0" in the factory
settings; however, this can be changed. Note that changing the exchange
line access number restricts the telephone number plan.
3. Enter the corresponding name in the Name entry field. The following entries are
possible:
Up to 15 digits
Digits and characters
Further steps:
– Save your settings before you leave the page.
210
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11