Putting Isdn System Telephones Into Operation; Putting Voip End Devices Into Operation; Putting Voip System Telephones Into Operation - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Installing and Switching on the PBX
Commissioning

Putting ISDN System Telephones into Operation

Putting ISDN System Telephones into Operation
Requirements:
– The internal telephone number is configured on the S
1. Connect end devices with a separate power supply to the 230 V mains.
2. Select the language.
3. Enter the internal telephone number as an MSN for the end device.
The end device is ready for operation.

Putting VoIP End Devices into Operation

Requirements:
– The internal telephone number is configured for VoIP.
– Recommended: The user PIN is configured for the internal telephone number.
1. Connect end devices with a separate power supply to the 230 V mains.
2. When configuring the end device, create a provider named "PBX" and then enter the
PBX IP address as the registrar and domain.
3. When configuring the end device, create an account for the provider "PBX" and enter
the internal phone number for the user name and the associated user PIN as the
password.
The end device logs on to the PBX.

Putting VoIP System Telephones into Operation

Requirements:
– The internal telephone number is configured for VoIP.
– Recommended: The user PIN is configured for the internal telephone number.
74
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
port in question.
0