Call Restrictor (Outgoing) - Restricted Numbers; Switching The Call Restrictor (Outgoing) On/Off - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Call Restrictor (outgoing) – Restricted Numbers

Switching the Call Restrictor (Outgoing) On/Off

Call Restrictor (outgoing) – Restricted Numbers
In order to restrict exchange line authorization, the telephone numbers that should not to be
dialled can be put in call restrictors. There are several ways to do this. In general, telephone
numbers are restricted that begin with a certain digit sequence and that should not be acces-
sible to every subscriber due to its higher charge tariffs, e.g., 0900 telephone numbers.
Normally, the first 4 to 5 digits indicate the telephone service that cause such high charges.
If an attempt is made to dial a restricted telephone number, only a busy tone is heard. If the
restricted numbers are not activated (meaning "not restricted"), restriction via the configured
exchange line authorization is still possible.
Switching the Call Restrictor (Outgoing) On/Off
Switching this on/off can be done as follows:
• Separately for subscribers
• Separately for business and personal calls
• Separately for configurations
• Separately for fax boxes (FUNCTIONS > Voice mail/fax boxes > Boxes + Click
line of the fax box in question): see step 4.
• For the exchange line transfer function (FUNCTIONS > Transfer > Exchange line
transfer)
• For the Call Through function (FUNCTIONS > Call Through > Exchange line settings)
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Configured call restrictor
– For personal calls: Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Exchange line settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear each the business and private check boxes under Call restrictor
(outgoing).
Enables the call restrictor.
Disables the call restrictor. (No other action is required.)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
in the
215