Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 23

Important Information
Intended Use
• 1 external analog port (only COMpact 3000 analog)
• 1 external ISDN S
• 4 internal analog ports
• Ethernet port (COMpact 3000 VoIP: 3 Ethernet ports)
• USB host 2.0
• SD card slot
Note: Accessories and service parts can be bought at specialised stores or
in the Internet shop distriCOM at http://www.districom.de. (Delivery is
provided only in Germany and to Austria.)
Hardware Extensions
The PBXs accommodate a module slot which can optionally be equipped with one of the
following modules:
• COMpact 2a/b module – for extending the PBX by adding 2 internal analog ports.
• COMpact S module – for extending the PBX by adding 1 internal S
0
• COMpact ISDN module – for extending the PBX by adding 1 port, separately switchable
between external S
Software Extensions
In an Upgrade Centre, you can extend the PBX with the following options:
• 2 VoIP channels, flexibly internally/externally switchable with wideband audio (COMpact
3000 VoIP: number of VoIP channels from 2 to 4)
• LAN-TAPI (number of subscribers from 4 to 8)
• X.31 at an internal and external S
module or COMpact ISDN module available as an option)
• Fax transfer (via the Auerswald Fax printer driver)
Internal Analog Port
An internal analog port is suitable for connecting one of the following end devices:
• Analog telephone with DTMF dialling, e. g. COMfortel 500 or COMfortel DECT 660C
Important: Devices using dual-tone multi-frequency dialling must be
equipped with a flash key (also referred to as signal key R).
Note: When using a T-Net-capable analog telephone, most T-Net functions
can be used via the existing function keys on the telephone.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
port (only COMpact 3000 ISDN)
0
, internal S and internal U
0 0
port (only COMpact 3000 ISDN with COMpact S
0
0
.
P0
port.
0
23