Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 82

Using the Configuration Manager
Configuration Manager
Operating Instructions for the Configuration Manager
For some functions, a small circular button (option button) is located next
to the setting options listed. The selected setting is indicated by a dot
inside the circle. The setting is changed by clicking an empty circle.
Selecting this setting option simultaneously deactivates any other
previous selection.
A square check box indicates a switching function. An empty check box
means "off" and "no"; a check mark on the other hand, means "on" and
"yes". The switchover is done by simply left-clicking the box.
A bar on a horizontal line represents a slider. The bar can be moved on
the line to configure the setting. To do this, place the cursor on the bar. It
appears
to the point you want.
Next to the line are informational or entry fields that display the exact
values, when appropriate.
Creating and Deleting Table Entries
The configuration manager displays the lists in table format across multiple pages. Only table
rows containing data are shown. A list can be lengthened or shortened.
Creating Entries
1. Fill out the empty entry fields in the lower table row.
2. Click .
The line is added to the list.
3. Repeat steps 1 and 2 to create additional entries.
Note: If you would like to simultaneously create multiple entries, enter – if
available – the desired range into the entry fields From and To and click
Deleting Entries
1. Select or clear the check box in the first table column in front of the entries to be deleted.
Deletes the entry in question.
Does not delete the entry in question.
2. Click:
• before the entry to be deleted and
• Selected rows
82
. Press and hold the left mouse button down and slide the bar
in the last table row and OK to delete multiple entries.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
to delete an individual entry.
.