Safety Information - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Important Information

Safety Information

Safety Information
Please observe the basic safety information given in the following.
Warning: Touching voltage-carrying conductors or telephone connections
may cause a life-threatening electric shock.
• Remove the power plugs for both the PBX and all accessories from the
power socket before you open the casing.
• If necessary, also disconnect the devices from auxiliary power sources
(e. g. UPS).
• Remove the dark gray cover panel. Do not remove the light gray casing
cover. This prevents accidental contact which may result in a shock from
hazardous voltages. Make sure that any repairs requiring the casing
cover to be removed are carried out by the manufacturer.
• Only mount the replaceable components (e. g. expansion modules) in a
voltage-free state.
• Only operate the device when the casing is closed.
• For some installation and maintenance work, it is necessary to open the
PBX while it is in operation. Close the casing after having finished the
work.
• Make sure there is always adequate insulation if you touch voltage-
carrying lines.
• Be sure to follow the relevant regulations when handling 230V system
voltage and devices attached to the mains.
Warning: Inappropriate use or incorrect replacement of the power plug can
result in a life-threatening electric shock or can damage or destroy or the
device:
• For this reason, only use a power plug of type no. FW7577/EU/40.
• Make sure it is inserted firmly and securely into the power socket. Wobbly
connectors or cable sockets pose a fire risk.
• Do not remove the power plug by pulling on the cable. If you would like to
disconnect the power supply, pull the power plug itself.
• If the power plug is damaged, first unscrew the fuse for the power supply
before pulling out the power plug.
Warning: Liquid entering the casing can cause life-threatening electric
shocks or damage/destroy the PBX.
• Only operate PBX in closed, dry rooms.
• Only clean the device externally with a soft moist cloth or anti-static cloth.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
19