Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 331

Configuring and Operating Functions
Wake-up Functions
Recording, Saving and Listening to Wake-up Announcements
Note: The announcement text to be recorded can be up to 20 seconds long.
After this time, recording is automatically stopped, and you will hear the
confirmation tone.
7. To stop recording, dial #.
You will hear a hold tone. Then the announcement just recorded is played back.
Note: To stop recording, you can also hang up the receiver.
Saving the Wake-up Announcement on the PC via the Configuration Manager
The wake-up announcements saved in the PBX ("good_morning.wav," "good_day.wav,"
"good_evening.wav") can be saved onto the PC as a backup copy.
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Wake-up functions > File and volume.
2. In the File list field, select one of the following options:
Wake-up announcement 1: Saves wake-up announcement 1 on the PC.
Wake-up announcement 2: Saves wake-up announcement 2 on the PC.
Wake-up announcement 3: Saves wake-up announcement 3 on the PC.
3. Click Read under Read from PBX.
A file location dialog opens.
4. Select the desired location and click Save (this text is dependent on the operating
system used).
Setting the Volume of Wake-up Announcement via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Wake-up functions > File and volume.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
331