Switching The Authorization For External Call Transfer Externally On/Off - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
Transfer and Callback

Switching the Authorization for External Call Transfer Externally On/Off

Further steps:
– Save your settings before you leave the page.
Switching the Authorization for External Call Transfer Externally On/Off
If the authorization for transferring external calls externally is enabled, the subscriber in
question can transfer a call between two external subscribers.
Note: The transferred call is limited to a pre-configured time period
(FUNCTIONS > Transfer).
Switching this on/off can be done as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
– Exchange line authorization assigned to the subscriber for external calls (International or
National)
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Authorizations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Transfer of external calls externally check box.
Enables the authorization for transferring external calls in externally.
Disables the authorization for transferring external calls in externally.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
485