Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 421

Configuring and Managing the PBX
VoIP
Configuring the Number Presentation (Outgoing)
in the user name + display text: Your own external telephone number that is
to be transmitted to the receiver is transmitted to the VoIP provider in the
"display test" and "user name" areas.
in the P-Preferred-Identity: Your own external telephone number that is to be
transmitted to the receiver is transmitted in the "P-Preferred-Identity" area to
the VoIP provider.
6. Under Format of transferred telephone number, select one of the following options:
country code with leading zeroes: Your own external telephone number that
is to be transmitted to the receiver is transmitted to the VoIP provider along with
the entire country prefix (e.g., 0049).
country code with leading + sign: Your own external telephone number that
is to be transmitted to the receiver is transmitted to the VoIP provider along with
the entire country prefix and in the mobile phone telephone book format
(e.g., +49).
country code without leading zeroes: Your own external telephone number
that is to be transmitted to the receiver is transmitted to the VoIP provider with
the shortened country code (without the international prefix (digit), e.g., 49).
without country code: Your own external telephone number that is to be
transmitted to the receiver is transmitted to the VoIP provider without the
country prefix.
7. Under Display text for number suppression, select one of the following options:
no display text: No display text for enabled telephone number suppression is
transmitted from the VoIP provider to the receiver.
anonymous/anon.: The display text "anonymous/anon." is transmitted from
the VoIP provider to the receiver when telephone number suppression is
enabled.
8. Select or clear the By provider ("Privacy: User" Set) check box.
The VoIP provider transmits no telephone number to the receiver.
The VoIP provider transmits the telephone number obtained from the PBX to
the receiver.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
421