Switching The Recording Of Wake-Up Calls In The Call Data Base On/Off; Recording, Saving And Listening To Wake-Up Announcements - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Wake-up Functions

Switching the Recording of Wake-up Calls in the Call Data Base On/Off

3. Select one of the following options in the Between all following wake-up calls list
field under Pause between wake-up calls.
1 to 15: There is a pause of 1 to 15 minutes between the second and the
following wake-up calls.
Further steps:
– Save your settings before you leave the page.
Switching the Recording of Wake-up Calls in the Call Data Base On/Off
If the recording wake-up calls in the call data base is enabled, wake-up calls are entered in the
call data.
Switching this on/off can be done as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Wake-up functions > Settings.
2. Select or clear the Record Wake-up calls in the call data base check box.
Enables the recording of wake-up calls in the call data base.
Disables the recording of wake-up calls in the call data base.
Further steps:
– Save your settings before you leave the page.

Recording, Saving and Listening to Wake-up Announcements

When accepting a wake-up call, different wake-up announcements can be played back
depending on the time of day. Up to three wake-up announcements can be configured for this.
Recording and listening to can be carried out as follows:
• Using a character string on the internal telephone
328
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11