Busy On Busy; Switching Busy On Busy On/Off - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions

Busy on Busy

Switching Busy on Busy On/Off

Busy on Busy
If a call is already in progress over one of your own external telephone numbers, the "Busy on
Busy" function prevents another external call to this telephone number from being signaled on
the internal subscribers selected in call distribution (another caller receives the busy tone, even
if call waiting is enabled on the subscriber speaking).
This is meaningful when there is only one person present in the office, and this person would
like to make calls undisturbed. Any other callers are given the impression through Busy on Busy
that no one is present.
Switching Busy on Busy On/Off
Switching this on/off can be done as follows:
• Separately for external telephone numbers
• Separately for configurations
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > Call distribution > Create call distribution.
Across the table, all of the separate external telephone numbers entered are
displayed.
Note: Click
telephone numbers. Click
2. Select or clear the Busy on Busy check box in the column of the telephone number
in question.
Enables Busy on Busy.
Disables Busy on Busy.
Further steps:
– Save your settings before you leave the page.
190
to scroll horizontally across the table and display other
to scroll back again.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11