Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 357

Configuring and Managing the PBX
Internal Telephone Numbers
Creating Line Groups
2. If necessary, change one of the internal telephone numbers displayed or enter a new
internal number in the From entry field under Telephone numbers. The following
entries are possible:
2 to 4 digits in the range of 10 to 9999
Note:
Double allocation of a number is not possible.
The telephone numbers 70, 80, 87, 701-706, 801-806, 875-879 and 8750-
8799 cannot be freely allocated. They are required for internal PBX use.
Using telephone numbers with few digits (two or three-digit numbers) inevi-
tably restricts the possible supply of telephone numbers with more digits.
For example, if the telephone number 12 is assigned, the telephone
numbers 120-129 and 1200-1299 are no longer available.
The default exchange line access number on the PBX is "0" in the factory
settings; however, this can be changed. Note that changing the exchange
line access number restricts the telephone number plan.
3. Enter a name for identification purposes in the Name entry field. The following entries
are possible:
Up to 16 digits
Digits and characters
Note: The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the telephone number.
4. Click .
Note: The line group subscribers are assigned on the page PROPERTIES >
Group members. Click
5. Repeat step 2 to 4 to enter additional telephone numbers.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
to switch directly to this page.
357