Creating A Call Restrictor (Incoming) - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Call Restrictor (Incoming) – Robinson Numbers

Creating a Call Restrictor (Incoming)

Further steps:
– Save your settings before you leave the page.
Switching the Call Restrictor (Incoming) On/Off via the Internal Telephone
Requirements:
– User PIN configured for the subscriber
– Call restrictor configured and assigned to the subscriber
– Authorization Controlling of the PBX via telephone assigned to the subscriber
1. Pick up the receiver.
2. Dial ##8.
3. Enter the user PIN.
4. Dial one of the following character strings:
*231#: Enables the call restrictor.
*230#: Disables the call restrictor.
Creating a Call Restrictor (Incoming)
A total of up to 10 call restrictors can be created. And a total of up to 100 telephone numbers/
ranges can be entered (e.g., 10 call restrictors, each with 10 telephone numbers or 5 call
restrictors, each with 20 telephone numbers).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page USER DATA > Call restrictor and deblocker > Call restrictor
(incoming) - Robinson numbers.
2. Enter the name of the call restrictor in the Name entry field. The following entries are
possible:
Up to 16 digits
Digits and characters
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
213