Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 32

Important Information
Technical Data
Reception amplification
Transmission amplifi-
cation
Ringer signal frequency
CLIP detection
Line seizure detection
Call start detection
Call end detection
External S Port
0
Connection (unit)
Connection type
Terminators
Ethernet Port
Connection (unit)
Interface
VoIP
VoIP standard
VoIP codecs on the
exchange line
VoIP codecs, internal
End devices
USB Host
Connection (unit)
Interface
32
Configurable
Configurable
Configurable
Configurable
Configurable
Configurable
Configurable
RJ-45 socket
S basis access as Point-to-Multipoint connection or as
0
a Point-to-Point connection, Euro ISDN (DSS1), unit is
powered locally.
Permanently installed
COMpact 3000 analog: RJ-45 socket „LAN"
COMpact 3000 ISDN: RJ-45 socket „LAN"
COMpact 3000 VoIP: one RJ-45 socket „WAN", two RJ-
45 sockets „LAN"
10/100 Base-T (10/100 Mbps, RJ-45 twisted-pair),
Full/half-duplex autonegation, Auto-MDIX,
COMpact 3000 VoIP: 3-port switch
SIP according to RFC 3261
G.722, G.711, G.726, iLBC
G.722, G.711, G.726, iLBC
1 end device per VoIP subscriber
COMpact 3000 analog: USB A-socket
COMpact 3000 ISDN: USB A-socket
COMpact 3000 VoIP: USB A-socket
USB (high speed, V2.0)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11