Saving Configuration Data For Automatically Loading Onto A Data Storage Medium; Saving Configuration Data For Automatically Loading From The Data Storage Medium In The Pbx - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance
Backing Up and Recovering Configuration Data

Saving Configuration Data for Automatically Loading onto a Data Storage Medium

Note: The configuration file must be named "auconfig.cfg".
1. Insert the USB memory stick into the USB port (USB host) or the SD card into the SD
card slot on the PBX.
2. Pick up the receiver of the internal telephone.
3. Dial ##8.
4. Enter the admin or sub-admin PIN.
5. Dial *902#.
The configuration saved on the USB memory stick or on the SD card is saved in the
PBX.
Saving Configuration Data for Automatically Loading onto a Data Storage
Medium
Requirements:
– A configuration file (*.cfg) saved on the PC
1. Rename the configuration file saved on the PC to auconfig.cfg.
2. Save the configuration file auconfig.cfg in the root directory of a USB memory stick
or on an SD card.
Further steps:
– Save the configuration data for the automatic loading on the PBX.
Saving Configuration Data for Automatically Loading from the Data Storage
Medium in the PBX
The saving procedure can be carried out as follows:
• Via the PBX
508
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11