Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 420

Configuring and Managing the PBX
VoIP
Configuring the Number Presentation (Outgoing)
Requirements:
– External VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and activated in
the Upgrade Center)
– Configuration manager, opened with sufficient authorization
– Configured external telephone numbers
– Number presentation suppression: Support of the service attribute number presentation
suppression by the VoIP provider
– Number presentation suppression: Number presentation suppression enabled for the
subscriber
1. Open the page CONFIGURATION > Voice over IP (VoIP) > VoIP provider.
2. Click in the line of the corresponding VoIP provider.
The Provider configuration opens.
3. Open the page Provider configuration > Number presentation (outgoing).
4. Under Format of the dialled telephone number, select one of the following options:
country code with leading zeroes: The telephone number of the receiver is
transmitted from the PBX along with the entire country prefix (e.g., 0049) to the
VoIP provider.
country code with leading + sign: The telephone number of the receiver is
transmitted from the PBX along with the entire country prefix in the same
format used in mobile phone telephone books (e.g., +49) to the VoIP provider.
country code without leading zeroes: The telephone number of the receiver
is transmitted from the PBX along with a shortened country prefix (without the
international prefix (digit), e.g., 49) to the VoIP provider.
without country code: The telephone number of the receiver is transmitted
from the PBX to the VoIP provider without the country prefix.
without country and local area code: The telephone number of the receiver
is transmitted from the PBX to the VoIP provider without the country prefix and
the local area code.
5. Under Type of line identification presentation, select one of the following options:
in the display text: Your own external telephone number that is to be trans-
mitted to the receiver is transmitted to the VoIP provide in the "display text"
area.
in the user name: Your own external telephone number that is to be trans-
mitted to the receiver is transmitted to the VoIP provider in the "user name"
area.
420
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11