Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 354

Configuring and Managing the PBX
Internal Telephone Numbers
Creating VoIP Subscribers
Note: The PBX provides the codecs G.722, G.711, G.726 and iLBC for
internal IP telephony. A Standard VoIP telephone must support at least one
of these codecs.
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Internal VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and enabled in the
Upgrade Center)
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > Internal numbers > VoIP subscribers.
Note: The creation is also provided during the quick configuration using the
configuration wizard.
2. If necessary, change one of the internal telephone numbers displayed or enter a new
internal number in the From entry field under Telephone numbers. The following
entries are possible:
2 to 4 digits in the range of 10 to 9999
Note:
Double allocation of a number is not possible.
The telephone numbers 70, 80, 87, 701-706, 801-806, 875-879 and 8750-
8799 cannot be freely allocated. They are required for internal PBX use.
Using telephone numbers with few digits (two or three-digit numbers) inevi-
tably restricts the possible supply of telephone numbers with more digits.
For example, if the telephone number 12 is assigned, the telephone
numbers 120-129 and 1200-1299 are no longer available.
The default exchange line access number on the PBX is "0" in the factory
settings; however, this can be changed. Note that changing the exchange
line access number restricts the telephone number plan.
354
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11