Configuring The Remote Switching Number For System Telephones - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance
Remote Configuration and Alternative Connection Options

Configuring the Remote Switching Number for System Telephones

Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
– Configured external telephone numbers
1. Open the page SERVICE > Remote configuration.
2. Select the telephone number you want from the Remote switching number list field
under Remote configuration (PPP) and remote programming.
Note: This telephone number may not be rerouted using call forwarding.
Further steps:
– Save your settings before you leave the page.
Configuring the Remote Switching Number for System Telephones
The remote switching number is one of the telephone numbers available on own's own
connection and is used to carry out a remote configuration for an ISDN system telephone
connected to the PBX.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
– Configured external telephone numbers
1. Open the page SERVICE > Remote configuration.
2. Select the telephone number you want from the Remote switching number list field
under Remote configuration of system telephones.
Note: This telephone number may not be rerouted using call forwarding.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
)
527