Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 21

Important Information
Safety Information
Important: A power failure, damaged connection lines/cable sockets, or
short-circuits in other devices in the building systems can put the PBX out of
operation.
• Using an ISDN Autoswitch (Auerswald optional accessory), you can
switch a single emergency telephone from an internal to an external S
port during a power failure.
• If you have an uninterruptible power supply, e. g. the UPS-5115 Telecom
(Auerswald optional accessory), you can continue operating a large part
of the system during a power failure.
Important: Make sure to take suitable measures for protecting your data
and yourself from misuse.
• Prevent unauthorized access to the PBX and its programming.
• It is important to consistently use all of the available options for assigning
passwords. Do not use passwords which are easy to guess, such as
birthdays.
• Make use of the permissions available (programming authorization,
exchange line authorizations, restricted numbers, etc.).
• Check the call data recording of your PBX and the LOGs of your NAT
router regularly for inconsistencies.
• Additional information about protecting the system from misuse can be
found at the German Federal Office for Information Security: "Secure use
of digital telecommunication systems" (in German) as well as on the
service portal at the Auerswald web site (Internet address:
www.auerswald.de).
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
0
21