Copying Switching Times - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Configuration Switchover

Copying Switching Times

(Example: When you enter 34 minutes, this value is rounded down to 30
minutes.)
4. Select the desired configuration in the Configuration list field.
Further steps:
– Save your settings before you leave the page.
– Enable the automatic configuration switchover.
Copying Switching Times
Created switching times can be copied from one weekday to another. Doing this, existing
switching times of the target weekday (to) are replaced by the switching times of the source
weekday (Copy switching times from).
Copying can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
– Created switching times
1. Open the page FUNCTIONS > Configurations > Create switching times.
2. Click Copy switching times.
3. In the Copy switching times from list field, select the weekday, whose switching
times should be copied.
4. In the to list field, select the weekday to which the switching times should be copied.
5. Click Copy switching times.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
233