Configuring The Outbound Proxy - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
VoIP

Configuring the Outbound Proxy

5. Enter the STUN server in the IP address or URL entry field under STUN server/NAT
traversal. The following entries are possible:
IP address with a range of 0 to 255 (example: 103.103.103.103)
URL (example: www.stunserver.de)
6. Enter the associated port number (Port) in the Port entry field under STUN server/
NAT traversal. The following entries are possible:
1 to 65535
7. Enter a value in the Interval for STUN server query entry field under STUN server/
NAT traversal. The following entries are possible:
1 to 60: A STUN server query takes place every 1 to 60 minutes.
Further steps:
– Save your settings before you leave the page.
Configuring the Outbound Proxy
The outbound proxy is an intermediate server that processes all VoIP requests and connec-
tions going to the provider (except for registration).
Configuration can be carried out as follows:
• Separately for VoIP providers
• Via the configuration manager
Requirements:
– External VoIP channel (COMpact 3000 VoIP or VoIP channels purchased and activated in
the Upgrade Center)
– Configuration manager, opened with sufficient authorization
– A configured DNS server and, if necessary, an HTTP proxy server
1. Open the page CONFIGURATION > Voice over IP (VoIP) > VoIP provider.
2. Click in the line of the corresponding VoIP provider.
It opens the page Provider configuration > Provider.
3. Under Outbound proxy, select one of the following options:
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
409