Call Waiting Calls; Options During A Call Waiting Call; Rejecting A Call Waiting Call - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Telephoning

Call Waiting Calls

Options During a Call Waiting Call

Call Waiting Calls
During a call, you are made aware of another call (external or internal subscriber) by a call
waiting signal.
Options During a Call Waiting Call
During a call waiting call, the following actions are possible:

Rejecting a Call Waiting Call

If you receive another call while you are already making a call and you do not want to speak
with the second caller, or you do not want to interrupt the first call, you can reject the call waiting
call. The caller receives a busy signal – in as far as no other telephones are called.
Accepting the Call Waiting Call
If you receive another call while you are already making a call and you would like to speak to
the second caller, or you would like to end the current call, you can accept the call waiting call.
After accepting, you are connected with the other caller. Your previous communication partner
hears the hold music.
Disconnecting the Current Call and Accepting the Call Waiting Call
If you receive another call while you are already making a call and you would like to speak to
the second caller, you can accept the call waiting call and disconnect the current call at the
same time.
Rejecting a Call Waiting Call
Requirements:
– The call waiting function has to be enabled for the subscriber.
If a call waiting call is signaled, proceed as described in the following.
1. Press the Flash key (when using a telephone with DTMF dialling) or the Query key
(when using an ISDN telephone).
2. Dial 0.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
97