Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 20

Important Information
Safety Information
Warning: Damaged connection lines as well as damage to the casing and
to the PBX can cause life-threatening electrical shocks.
• Only connect the device connection cable with sockets that are designed
for that purpose.
• Make sure that the Schuko socket for connecting the PBX is properly
connected (according to VDE0100). The power socket must be located
near the PBX and be freely accessible at all times.
• Replace damaged connection lines immediately.
• Always have a professional carry out repairs immediately. Please contact
your dealer or the manufacturer directly.
Warning: Power surges, which can occur during electrical storms, can
cause life-threatening electric shocks or damage/destroy the PBX.
• For this reason, do not open or mount the PBX during an electrical storm.
Avoid disconnecting and connecting lines during an electrical storm.
• Lay all the cables inside the building.
• Protect the devices by installing overvoltage protection.
Caution: Unauthorized changes to the device can damage the PBX or
breach security and EMC regulations. If security-relevant radio services are
disturbed, the Federal Network Agency can order decommissioning the
device according to §14, section 6, Electromagnetic Compatibility Act.
• Always have a professional carry out repairs. Please contact your dealer
or the manufacturer directly.
Caution: Exceeding (even temporarily) the threshold values indicated in the
technical data can damage or even destroy the PBX.
• Note the threshold values indicated in the technical data for voltage,
electricity, performance, ambient temperature, and humidity.
Caution: Electrostatic charges can destroy sensitive components.
• Divert electrostatic charges from yourself before touching the electronic
components with your hands or any tools. To do this, touch a metal object,
preferably earthed, e. g. a heater or computer housing.
Important: Mechanical loads and electro-magnetic fields can impair PBX
operation.
• Avoid mechanical loads (e. g. vibrations).
• Avoid proximity to devices that generate electro-magnetic fields or react
sensitively to them (e. g. radio receivers, amateur radio sets, mobile
phones, DECT systems, or similar).
• Do not expose the device to direct sunlight or condensation.
• Protect the device from an extreme amount of dust.
• Note the values for ambient temperature and humidity indicated in the
technical data.
20
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11