Internet Access; Configuring The Dns Server - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX

Internet Access

Configuring the DNS Server

Internet Access
In order to carry out Voice over IP or functions such as an online name search, the PBX must
be prepared for Internet access by configuring a few settings.
Configuring the DNS Server
A DNS server is necessary for Internet access. The data is specified by the Internet service
provider or system administrator of the network.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > Server configuration > Network.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
2. In the First DNS server and Second DNS server entry fields under DNS configu-
ration, enter the IP address for each of the DNS servers. The following entries are
possible:
IP address with a range of 0 to 255 (example: 192.168.0.12)
Note: If you cannot enter a DNS server, the gateway is automatically used
instead.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
345