Switching Room Monitoring Off; Configuring The External Pin - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Room Monitoring

Switching Room Monitoring Off

Switching Room Monitoring Off
• Hang up the receiver of the corresponding telephone.

Configuring the External PIN

The external PIN is required for the following:
• Perform a configuration switchover manually via an external telephone
• Monitor a room via an external telephone
• A dial-up connection for initiating remote configuration on the PBX if the user name
"external" is used
The configuration can be made as follows:
• Via the configuration manager
• Using a character string on the internal telephone
Configuring an External PIN via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page SERVICE > Remote configuration.
2. Enter the external PIN in the External PIN entry field under Remote configuration
(PPP) and remote programming. The following entries are possible:
Exactly 6 digits
Digits
Note:
The PIN may not begin with a zero.
All of the PINs in the PBX are unique. This means that it is not possible to
allocate the same PIN twice.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
297