Configuring And Operating Functions - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions

Configuring and Operating Functions
This section describes how to set up and operate the functions on your PBX. You will find out
what the functions do, how to operate each function and how to allocate authorization for using
a function, when necessary.
In most cases, operation of the system can be carried out in two different ways:
• Operation using an internal telephone
• Operation using the configuration manager
Topics
– Baby Call (page 187)
– Boss/Secretary Function (page 189)
– Busy on Busy (page 190)
– Call Deblocker (Incoming) – VIP Numbers (page 191)
– Call Deblocker (Outgoing) – Release Codes (page 194)
– Call Forwarding (page 197)
– Call Parking (page 207)
– Call Restrictor (Incoming) – Robinson Numbers (page 212)
– Call Restrictor (outgoing) – Restricted Numbers (page 215)
– Call Through (page 218)
– Call Waiting (page 223)
– CLIP Texts (page 224)
– Configuration Switchover (page 226)
– Do-not-disturb (page 235)
– Energy Savings Function (Economy Mode) (page 237)
– Exchange Line Authorization (page 238)
– Exchange Line Transfer (page 240)
– InterCom Announcement/Handsfree (page 245)
– LAN-TAPI (page 247)
– LCR (page 254)
– Multi-path Call Forwarding (page 265)
– Music on Hold and Announcement (page 268)
– Network Memory (page 277)
– Network Printer (page 279)
– Number Presentation (page 283)
– Online Name Search (page 285)
– Pickup (page 288)
– Private (Personalized) Exchange Line Access (page 292)
– Room Monitoring (page 295)
– Short-code Authorization (page 300)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
185