Installing Tapi Driver (Tsp) - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
LAN-TAPI

Installing TAPI driver (TSP)

Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page FUNCTIONS > LAN TAPI > LAN TAPI configuration.
2. Enter the password in the Password for the network connection of the TAPI server
entry field. The following entries are possible:
6 to 8 characters
Digits and characters
Further steps:
– Save your settings before you leave the page.
Installing TAPI driver (TSP)
The PBX must be connected with a server PC via a TCP/IP network. The TAPI driver (TSP)
that belongs to the PBX must be installed on this server PC from the Auerswald Mega Disk.
Important: If you would like to integrate the LAN-TAPI into an existing
network, please contact the system administrator responsible for this. Making
changes to an existing network may cause considerable functional distur-
bances.
Note: Instead of the driver on the accompanying Auerswald Mega Disk, you
can download – if available – a newer version from the Auerswald Web site.
Requirements:
– Auerswald Mega Disk
– Server PC that fulfills one of the following system requirements:
- Windows XP SP3 32/64-bit
- Windows Vista SP1 32/64-bit
- Windows 2000 Professional/Server SP4
- Windows 2003 Server SP2 32/64-bit
- Windows 2008 Server 32/64-bit
- Terminal server: Windows 2000 SP4, 2003 SP2 32/64-bit, 2008 32/64-bit
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
249