Creating Networks Manually - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
LCR

Creating Networks Manually

3. Click Create LCR networks automatically with help of the area code.
Further steps:
– Save your settings before you leave the page.
– Enter the tariff information in the LCR tables.
Creating Networks Manually
Up to 60 networks can be generated.
Note: LCR networks and the corresponding LCR prefixes can automati-
cally be created based on the local area code (FUNCTIONS > Least Cost
Routing > LCR networks under Create LCR networks automatically with
help of the area code).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Least Cost Routing > LCR networks.
2. Enter a name for identification in the first available Name entry field. The following
entries are possible:
Up to 16 digits
Digits and characters
3. Click .
The network has been added to the list.
4. Repeat steps 2 to 3 to create additional entries.
Further steps:
– Save your settings before you leave the page.
– Create the corresponding prefixes for the networks to complete the tariff groups.
– Enter the tariff information in the LCR tables.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
259