Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 531

Service and Maintenance
Remote Configuration and Alternative Connection Options
Configuring a Dial-up Connection on the PC
4. Click Communications.
5. Click New Connection Wizard.
6. Click Next.
7. Click Connect to the Internet and then click Next.
8. Click Set up my connection manually and then click Next.
9. Click Connect using a dial-up modem and then click Next.
The available dial-up devices are displayed.
10. Select the check box for the connection you want and click Next.
11. Under ISP Name, enter any connection name, for example, "PBX + [customer name]"
and click Next.
12. Depending on the desired configuration to be made, proceed as described in the
following.
• For configuration via the internal S
internal CAPI dial-in access number on the PBX and click Next.
• For remote configuration via the external S
enter the remote switching number (including local area code and exchange line
access number) on the PBX and click Next.
13. Depending on the PIN available, proceed as described in the following.
• For an external PIN: Under User name, enter "external" and under Password as
well as under Confirm password, enter the external PIN on the PBX.
• For an admin PIN: Under User name, enter "admin" and under Password as well
as under Confirm password, enter the admin PIN on the PBX.
• For a sub-admin PIN: Under User name, enter the internal telephone number of
a sub-admin, and under Password as well as under Confirm password, enter
the associated sub-admin PIN.
14. Disable the check box for the three options offered and click Next.
15. Select the check box Add a shortcut to this connection to my desktop, and click
Finish.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
port: Under Telephone number, enter the
0
port: Under Telephone number,
0
531