Exporting The Call Data List - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Managing the Telephone Book and Lists
Call Data

Exporting the Call Data List

Billing (Billing factor)
The conversion factor for the charges is displayed. This value can be changed depending on
the subscriber. Changes to the entries have not affect on calls until the changes have been
applied.
Note: The billing factor (Billing) is not visible in the display for a user logged
in on the configuration manager. Instead, the calculated product from the
transmitted charges and the Billing factor (Billing) can be seen in the user
view under Charges.
Hidden Call Data
All call data that has not been enabled in the call data list for display (FUNCTIONS > Call data
> Display).
Telephone Numbers in the External name Column (Ext. Subscriber)
The telephone number is displayed in the information field if a name is displayed in the External
name (Ext. subscriber) column for this telephone number.
Exporting the Call Data List
The current data in the table view can be exported (gesp_dat.csv.gz) for further processing with
external programs after it has been unzipped (e.g.,,. via Total Commander -> gespr_dat.csv).
The export can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– In the data in the call data list
1. Open the page USER DATA > Call data list.
2. Click Export.
A dialog for downloading the compressed file "gesp_dat.csv.gz" opens.
3. Save the file on the PC.
134
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11