Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 550

Short Operation Instructions
Telephoning
Callback/Exchange Line Reservation:
Initiate
Delete callback on busy ahead of
time:
Initiate reservation of exchange line
on busy:
= Flash key or Query key
Conference Calls
Initiate a conference call during a
query call:
End a conference call:
Connect both conference call
partners:
Back to the communication partner
previously been active (query):
Back to the communication partner
previously been on hold (query):
= Flash key or Query key
InterCom Announcement/Handsfree:
Initiate
Call system telephone for
InterCom announcement:
Call system telephone for
InterCom handsfree:
= ** + internal telephone number of the system telephone (If you do
1
not use a direct exchange line access, omit the **.)
Pickup and Call Pickup
Accept call for another telephone
(pickup):
550
# 37 #
37 #
*
3
(hang up)
4
2
1
## 011
1
## 012
1
## 06
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
Pickup and Call Pickup
Take a call from the answering
machine:
= ** + internal telephone number of the telephone/answering
machine (If you do not use a direct exchange line access, omit
the **.)
Query and Splitting
Initiate an internal query call:
Initiate an external query call:
Terminate query call on no reply:
Speak to each communication
partner going back and forth
between the two during a query call
(splitting):
Terminate call on hold and continue
the call previously been active during
a query call:
Terminate active call during a query
call and continue the call with the
communication partner previously
been on hold:
Connect both communication
partners during a query call by
hanging up the receiver:
= Flash key or Query key
= ** + internal telephone number of the individual telephone (If you
1
do not use a direct exchange line access, omit the **.)
or ** + internal telephone number of the line group (If you do not
use a direct exchange line access, omit the **.)
= external telephone number (If you do not use a direct exchange
2
line access, dial the exchange line access number before dialling
the telephone number.)
or ** + short code number (If you do not use a direct exchange line
access, omit the **.)
Query and Third Call
Initiate a third call with an internal
telephone:
## 06
1
2
1
2
0
1
(hang up)
5
1