Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 532

Service and Maintenance
Remote Configuration and Alternative Connection Options
Configuring a Dial-up Connection on the PC
Configuring a Dial-up Connection on Windows Vista
Requirements:
– For configuration via the internal S
– For remote configuration via the external S
– Knowledge of the external PIN, the sub-admin PIN or admin PIN
1. Click Start.
2. Click Connect to.
3. Click Set up a connection or network.
4. Click Set up a dial-up connection and click Next.
5. Depending on the desired configuration to be made, proceed as described in the
following.
• For configuration via the internal S
internal CAPI dial-in access number on the PBX.
• For remote configuration via the external S
enter the remote switching number (including local area code and exchange line
access number) on the PBX.
6. Depending on the PIN available, proceed as described in the following.
• For an external PIN: Under User name, enter "external" and under Password,
enter the external PIN on the PBX.
• For an admin PIN: Under User name, enter "admin" and under Password, enter
the admin PIN on the PBX.
• For a sub-admin PIN: Under User name, enter the internal telephone number of
a sub-admin, and under Password, enter the associated sub-admin PIN.
7. Under Connection name, enter any connection name, for example, "PBX +
[customer name]" and click Connect.
8. Click Skip.
9. Click Set up the connection anyway.
532
port: Configured internal CAPI dial-in number
0
port: Configured remote switching number
0
0
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
port: Under Dial-up phone number, enter the
port: Under Dial-up phone number,
0