Creating A Call Deblocker (Incoming) - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Call Deblocker (Incoming) – VIP Numbers

Creating a Call Deblocker (Incoming)

Note: The telephone numbers/ranges are entered in the call deblocker on the
page USER DATA > Call restrictor and deblocker > Call deblocker
(incoming) - VIP numbers. Click
Further steps:
– Save your settings before you leave the page.
Switching the Call Deblocker (Incoming) On/Off via the Internal Telephone
Requirements:
– A user PIN configured for the subscriber
– A call deblocker configured and assigned to the subscriber
– Authorization Controlling of the PBX via telephone assigned to the subscriber
1. Pick up the receiver.
2. Dial ##8.
3. Enter the user PIN.
4. Dial one of the following character strings:
*221#: Enables the call deblocker.
*220#: Disables the call deblocker.
Creating a Call Deblocker (Incoming)
A total of up to 10 call deblockers can be created. This means that a total of up to 100 telephone
numbers/ranges can be entered (e.g., 10 call deblockers, each with 10 telephone numbers or
5 call deblockers, each with 20 telephone numbers).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page USER DATA > Call restrictor and deblocker > Call deblocker
(outgoing) - VIP numbers.
192
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
to switch directly to this page.