Time And Call Allowance Account; Configuring An Account Type - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions

Time and Call Allowance Account

Configuring an Account Type

Time and Call Allowance Account
Each telephone can be credited a certain amount of time using a time account. When the time
credit is used up, it becomes no longer possible to make external calls on the corresponding
telephone until the credit is reset.
A call allowance account is a restricted amount of currency units that is configured for each
telephone. When these units are used up, it becomes no longer possible to make external calls
on the corresponding telephone until the credit is reset.
Configuring an Account Type
The configuration can be made as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an
0
option)
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Time and call allowance accounts > Accounts.
2. Click in the line of the corresponding subscriber.
3. In the Account type list field, select one of the following options:
Time account: Configures a time account for the subscriber.
Call allowance account: Configures a call allowance account for the
subscriber.
Important: If using a VoIP account for external calls, the call allowance
account doesn't work.
Further steps:
– Save your settings before you leave the page.
– Configure credit for the time or call allowance account.
308
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11