Configuration Manager; Minimum Requirements For The Pc For Using The Configuration Manager; Opening The Configuration Manager - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Using the Configuration Manager

Configuration Manager

Minimum Requirements for the PC for Using the Configuration Manager

Configuration Manager
The configuration manager lets you easily configure the PBX on your computer. It is reachable
over the integrated Web server on the PBX. The required PC is connected either directly to a
Ethernet port on the PBX or it must be on the same network.
Minimum Requirements for the PC for Using the Configuration Manager
The computer must meet the following requirements:
• PC with Intel Pentium 1 GHz or compatible processor
• Windows XP (as of Service Pack 3), Windows Vista 32/64-bit (as of Service Pack 2),
Windows 7 32/64-bit, Mac OS X (as of 10.4), Linux (as of Kernel 2.6)
• Memory (RAM: 256 MB, recommended 512MB; for Windows Vista/7: 1024 MB, for 64-bit
2048 MB
• Browser for the configuration: Recommended is Microsoft Internet Explorer as of version
7.0, Mozilla Firefox as of version 2.0, Safari as of version 5.0
• Network card (the computer must be equipped with a network card and the required driver
installed)
• Internet Protocol (TCP/IP) (Transmission Control Protocol/Internet Protocol)
• Mouse or compatible pointing device
• SVGA graphics card with a resolution of 1024 x 768; and 65536 colors (16 bits)

Opening the Configuration Manager

Opening can be carried out at the following authorization levels:
• As an administrator
• As a sub-administrator
• As a user
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
77