Energy Savings Function (Economy Mode); Switching Energy Savings Function (Economy Mode) On/Off - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions

Energy Savings Function (Economy Mode)

Switching Energy Savings Function (Economy Mode) On/Off

Energy Savings Function (Economy Mode)
Economy mode provides the option of either switching off all of the LEDs on the PBX or
switching off all of the LEDs except for the "Power" LED. This is not lit constantly, but flashes
slowly.
Depending on the configuration, economy mode is enabled when the switches to a specific
configuration.
Switching Energy Savings Function (Economy Mode) On/Off
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
– Configured configuration and switching times
1. Open the page FUNCTIONS > Configurations > Creating configurations.
2. In the ECO mode list field under the corresponding configuration, select one of the
following options:
off: Disables economy mode.
only "Power" LED on: Enables economy mode. All of the LEDs except for the
"Power" LED are disabled.
all LEDs off: Enables economy mode. All of the LEDs are disabled in this
case.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
)
237