Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 462

Configuring and Managing the PBX
PBX Time
Switching Automatic PBX Time Updates via ISDN for Missing Time On/Off
Requirements:
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an
0
option)
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > PBX time.
2. Select or clear the Automatic ISDN call check box.
Enables the automatic updating of the PBX time if the time is missing.
Disables the automatic updating of the PBX time if the time is missing. (No
other action is required.)
3. In the entry field, enter the telephone number that the PBX should automatically dial.
The following entries are possible:
Up to 16 digits
Digits
Note:
If no telephone number is entered, the PBX automatically initiates a call
using the MSN/DDI first entered.
When entering a telephone number, it should be a connection on which an
automatic machine can accept a call.
Further steps:
– Save your settings before you leave the page.
462
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11