Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions page 230

Configuring and Operating Functions
Configuration Switchover
Copying Configurations
Copying a Complete Configuration
Requirements:
– Configuration manager, opened with sufficient authorization
– At least two configured configurations
– Expert view (click
1. Open the page FUNCTIONS > Configurations > Create configurations.
2. Click Copy configuration.
3. In the Copy configuration from list field, select the configuration which contains
settings to be copied.
4. In the to list field, select the configuration to which the settings should be copied.
5. Click Copy configuration.
6. Click Next.
Copying Parts of the Configuration
Requirements:
– Configuration manager, opened with sufficient authorization
– At least two configured configurations
– Expert view (click
1. Open one of the following pages:
• PROPERTIES > Internal subscribers > Subscriber properties for the parts
exchange line authorization, do-not-disturb, baby call, call deblocker, call restrictor
• CONFIGURATION > Call distribution > Create call distribution for the parts
Busy on Busy, multi-path call forwarding, call distribution
2. Click the tab of the configuration of which the settings are to be copied.
3. For the parts exchange line authorization, do-not-disturb, baby call, call deblocker, call
restrictor:
a) Open the page PROPERTIES > Internal subscribers > Subscriber properties
(configuration-dependent).
230
)
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11