Telephoning
Outgoing Calls
Initiating an Internal Call
Initiating an Internal Call
1. Pick up the receiver.
2. Enter an internal telephone number. The following entries are possible:
** and internal telephone number of the individual telephone (If you do not
use a direct exchange line access, omit the **.)
** and internal telephone number of the line group (If you do not use a
direct exchange line access, omit the **.)
Once you have finished dialling the telephone number, the subscriber will be called.
Initiating an External Call
1. Pick up the receiver.
2. Enter an external telephone number. The following entries are possible:
External telephone number (If you do not use a direct exchange line access,
dial the exchange line access number before dialling the telephone number.)
** and short code number (If you do not use a direct exchange line access,
omit the **.)
Once you have finished dialling the telephone number, the subscriber will be called.
Initiating External Calls with Number Presentation Suppression
Requirements:
– The CLIR (suppression of telephone number display per call) service feature has been
enabled by the network operator.
1. Pick up the receiver.
2. Dial *31#.
3. Enter an external telephone number. The following entries are possible:
External telephone number (If you do not use a direct exchange line access,
dial the exchange line access number before dialling the telephone number.)
** and short code number (If you do not use a direct exchange line access,
omit the **.)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
101